Jardin Spa Enclosure Features & Benefits

Jardin Octagonal Screen Room

Benefit

Our 14 ounce vinyl tops are made in our own factory

Other manufacturers use outside sources. Each top has to pass our internal quality control

We use a heavier, stronger vinyl with a smoother surface

Stronger vinyl lasts longer - Smoother surface cleans easier

The vinyl sections that make up the 14 oz top are heat sealed together in both the free standing and wall attached units, not sewn

Other manufacturers stitch their roof seams. Threads at the seams will dry out and leaks may appear over time. Heat sealing prevents seam leakage

Roof rafters are 1" Galvalum tubing

Lots of built-in strength & weather-ability

The top extends beyond the screen walls providing a roof overhang of about 5"

Rain water will not run down the screens. Provides better protection from the sun and rain

Roof Tensioning System, built into the roof rafters within the 5" overhang

Allows you to manually (using a large thumb nut) adjust the tension of the roof, virtually eliminating any water accumulation on the roof

Choice of 6 colors: Green, Blue, Grey, Burgundy, White or Taupe

Other manufacturers typically offer a beige or grey top only. We have a color to suit your surroundings

Jardin Octagonal Screen Room

Benefit

1/8" thick Extruded Aluminum - Light weight, but very strong

We do not use rolled formed steel, no rusting, ever

Panels are never more than 44" in width

Other manufacturers typically have 50" panels. Panels over 48" wide do not have sufficient rigidity and are easily bent by children or the wind

Fiberglass Screening, top to bottom

Nylon mesh (typically found in tents) will not allow sufficient air circulation. Our screening can be easily replaced yourself if needed with readily available screen kits at your local hardware store

Supporting bar positioned at bottom third of panel

Unobstructed view. (ALL other manufacturers set them at the center of the panel)

Connected by heavy duty flexible PVC vinyl hinges and then bolted together with stainless steel brackets and hardware for superior rigidity

Other manufacturers depend on cables, plastic roof tip parts and Velcro to hold their rooms together

Mounted to your deck or patio with heavy gauge PVC channels in the both the free standing and wall mounted kits

Assures a solid and a secure attachment. This is one of the factors that enables our screen enclosures to stand up to heavy weather

Sliding Doors are a standard accessory in the wall attached 3 sided rooms and single sliding doors are standard in the free standing square, rectangular, and spa enclosures. *Note that a swing out door is standard on all round models

44" doors allow easy entry and movement of larger items. Available on patio Plus models

Optional Vinyl Wind Breaker panels (can be same color as the top) can be used on the top 2/3 or bottom 1/3 of screen

Supported by an aluminum frame with spring loaded locks that hold it securely on the inside of the screen. Easy to use

Optional Mylar windows (As above but clear Mylar)

Designed for top 2/3 of screen panel, hinged in the middle for opening to allow air circulation. Easily put on or removed